Subversion Repositories group.electronics

#ifndef __usbconfig_h_included__
#define __usbconfig_h_included__

/* ---------------------------- Hardware Config ---------------------------- */

#define USB_CFG_IOPORTNAME      D
#define USB_CFG_DMINUS_BIT      3
#define USB_CFG_DPLUS_BIT       2
#define USB_CFG_CLOCK_KHZ       12000
#define USB_CFG_CHECK_CRC       0

/* ----------------------- Optional Hardware Config ------------------------ */

/* #define USB_CFG_PULLUP_IOPORTNAME   D */
/* #define USB_CFG_PULLUP_BIT          4 */

/* --------------------------- Functional Range ---------------------------- */

#define USB_CFG_HAVE_INTRIN_ENDPOINT    1
#define USB_CFG_HAVE_INTRIN_ENDPOINT3   0
#define USB_CFG_EP3_NUMBER              3
#define USB_CFG_IMPLEMENT_HALT          0
#define USB_CFG_SUPPRESS_INTR_CODE      0
#define USB_CFG_INTR_POLL_INTERVAL      100
#define USB_CFG_IS_SELF_POWERED         0
#define USB_CFG_MAX_BUS_POWER           150
#define USB_CFG_IMPLEMENT_FN_WRITE      0
#define USB_CFG_IMPLEMENT_FN_READ       0
#define USB_CFG_IMPLEMENT_FN_WRITEOUT   0
#define USB_CFG_HAVE_FLOWCONTROL        0
#define USB_CFG_DRIVER_FLASH_PAGE       0
#define USB_CFG_LONG_TRANSFERS          0
/* #define USB_RX_USER_HOOK(data, len)     if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */
#ifndef __ASSEMBLER__
extern void hasUsbReset(void);
#endif
#define USB_RESET_HOOK(isReset)     if(!isReset){hadUsbReset();}
/* #define USB_SET_ADDRESS_HOOK()              hadAddressAssigned(); */
#define USB_COUNT_SOF                   0
#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH   0
#define USB_USE_FAST_CRC                0

/* -------------------------- Device Description --------------------------- */
#define  USB_CFG_VENDOR_ID       0xc0, 0x16 /* = 0x16c0 = 5824 = voti.nl */
#define  USB_CFG_DEVICE_ID       0xdc, 0x05 /* = 0x05dc = 1500 */
#define USB_CFG_DEVICE_VERSION  0x00, 0x03
#define USB_CFG_VENDOR_NAME     'n', 'e', 'w', 'i', 'o', 'i', 't', '.', 'c', 'o', 'm', '.', 'a', 'u'
#define USB_CFG_VENDOR_NAME_LEN 14
#define USB_CFG_DEVICE_NAME     'F', 'S', 'i', 'm', 'E', 'x', 't', '.', '1', '1', '0', '0'
#define USB_CFG_DEVICE_NAME_LEN 12
/*#define USB_CFG_SERIAL_NUMBER   'N', 'o', 'n', 'e' */
/*#define USB_CFG_SERIAL_NUMBER_LEN   0 */
#define USB_CFG_DEVICE_CLASS        0    /* set to 0 if deferred to interface */
#define USB_CFG_DEVICE_SUBCLASS     0
#define USB_CFG_INTERFACE_CLASS     3   /* HID */
#define USB_CFG_INTERFACE_SUBCLASS  0   /* no boot interface */
#define USB_CFG_INTERFACE_PROTOCOL  0   /* no protocol */
#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH    42
/* #define USB_PUBLIC static */

#define USB_CFG_DESCR_PROPS_DEVICE                  0
#define USB_CFG_DESCR_PROPS_CONFIGURATION           0
#define USB_CFG_DESCR_PROPS_STRINGS                 0
#define USB_CFG_DESCR_PROPS_STRING_0                0
#define USB_CFG_DESCR_PROPS_STRING_VENDOR           0
#define USB_CFG_DESCR_PROPS_STRING_PRODUCT          0
#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER    0
#define USB_CFG_DESCR_PROPS_HID                     0
#define USB_CFG_DESCR_PROPS_HID_REPORT              0
#define USB_CFG_DESCR_PROPS_UNKNOWN                 0

/* ----------------------- Optional MCU Description ------------------------ */

/* #define USB_INTR_CFG            MCUCR */
/* #define USB_INTR_CFG_SET        ((1 << ISC00) | (1 << ISC01)) */
/* #define USB_INTR_CFG_CLR        0 */
/* #define USB_INTR_ENABLE         GIMSK */
/* #define USB_INTR_ENABLE_BIT     INT0 */
/* #define USB_INTR_PENDING        GIFR */
/* #define USB_INTR_PENDING_BIT    INTF0 */
/* #define USB_INTR_VECTOR         INT0_vect */

#endif /* __usbconfig_h_included__ */