Subversion Repositories group.electronics

Rev

Rev 122 | Show entire file | Ignore whitespace | Details | Blame | Last modification | View Log | RSS feed

Rev 122 Rev 123
Line 3... Line 3...
3 
#include <avr/interrupt.h>
 3 
#include <avr/interrupt.h>
4 
#include <avr/pgmspace.h>
 4 
#include <avr/pgmspace.h>
5 
#include <util/delay.h>
 5 
#include <util/delay.h>
6 
#include <stdlib.h>
 6 
#include <stdlib.h>
7 
 
 7 
 
- 
 
 8 
#include "avrutil.h"
- 
 
 9 
#include "e2p.h"
- 
 
 10 
#include "wire.h"
- 
 
 11 
#include "mio.h"
- 
 
 12 
#include "lcd.h"
8 
#include "config.h"
 13 
#include "config.h"
9 
#include "uart.h"
 14 
#include "uart.h"
10 
 
 15 
 
11 
#ifndef NULL
 16 
#ifndef NULL
12 
#define NULL    ((void *)0)
 17 
#define NULL    ((void *)0)
Line 18... Line 23...
18 
#define UART_BAUD_RATE	9600
 23 
#define UART_BAUD_RATE	9600
19 
 
 24 
 
20 
volatile uint8_t tmr0_ovf = 0;
 25 
volatile uint8_t tmr0_ovf = 0;
21 
volatile uint32_t systime = 0;
 26 
volatile uint32_t systime = 0;
22 
 
 27 
 
- 
 
 28 
#define UART_SEND_DELAY 5000
- 
 
 29 
#define BUTTON_DELAY 500
- 
 
 30 
#define LCD_SEND_DELAY 80
- 
 
 31 
 
- 
 
 32 
volatile uint16_t buttontime = BUTTON_DELAY;
23 
volatile uint16_t sendtime = 1000;
 33 
volatile uint16_t sendtime = UART_SEND_DELAY;
- 
 
 34 
volatile uint8_t lcdTimer = LCD_SEND_DELAY;
24 
 
 35 
 
25 
 
 36 
 
26 
int main(void) {
 37 
int main(void) {
27 
 
 38 
 
28 
 
 39 
 
Line 40... Line 51...
40 
        PB4     -
51 
        PB4     -
41 
        PB5     -
52 
        PB5     -
42 
        PB6     -
53 
        PB6     -
43 
        PB7     -
54 
        PB7     -
44 
  */
 55 
  */
45 
  DDRB          = 0B11111111;
 56 
  DDRB          = 0B00001111;
46 
  PORTB         = 0B00000000;
 57 
  PORTB         = 0B00000000;
47 
 
 58 
 
48 
  /*
 59 
  /*
49 
        PC0     -
60 
        PC0     -
50 
        PC1     -
61 
        PC1     -
Line 67... Line 78...
67 
        PD7     - Input, Pullup		- * Button
 78 
        PD7     - Input, Pullup		- * Button
68 
  */
 79 
  */
69 
  DDRD          = 0B01011111;
 80 
  DDRD          = 0B01011111;
70 
  PORTD         = 0B10000000;
 81 
  PORTD         = 0B10000000;
71 
 
 82 
 
72 
    TIMSK0 = (1<<TOIE0);                    // Enable timer overflow
 - 
 
73 
    TCNT0 = 0x00;                           // Set Timer0 initial value to 0
 - 
 
74 
    TCCR0B = (1<< CS00) ;                   // /1 prescaler
 - 
 
75 
 
 83
76
- 
 
77
- 
 
78
84
- 
 
 85 
    sysclockInit();
- 
 
 86
79 
  uart_init( UART_BAUD_SELECT(UART_BAUD_RATE,F_CPU) );
 87 
    uart_init( UART_BAUD_SELECT(UART_BAUD_RATE,F_CPU) );
80 
 
 - 
 
81
88
82 
    wdt_enable(WDTO_1S);		// Watchdog for 1 sec
 89 
    wdt_enable(WDTO_1S);		// Watchdog for 1 sec
83 
    sei();				// Enable interrupts
 90 
    sei();				// Enable interrupts
- 
 
 91
- 
 
 92 
    i2c_master();
- 
 
 93 
    e2p_init();
- 
 
 94 
    mio_init();
- 
 
 95 
    lcd_init();
- 
 
 96
- 
 
 97 
    lcd_setCursor(0, 1);
- 
 
 98 
    lcd_print("Time:\0");
- 
 
 99
- 
 
 100 
    char display[10];
- 
 
 101
- 
 
 102 
    uint16_t address = 0x0003;
84 
 
 103 
 
85 
    sbi(PIND, PD6);
 104 
    sbi(PORTD, PD6);
86 
    _delay_ms(500);
 105 
    _delay_us(100);
87 
    cbi(PIND, PD6);
 106 
    cbi(PORTD, PD6);
88
107
89 
  char buffer[7];
 108 
    mio_iodir(0x02);
- 
 
 109 
    mio_pullups(0x02);
- 
 
 110 
    //mio_writeReg(0x00, 0x02);
- 
 
 111 
    //mio_writeReg(0x06, 0x02);
- 
 
 112 
    //mio_writeReg(0x0a, 0x01);
- 
 
 113 
    //mio_writeReg(0x0a, 0x00);
- 
 
 114
90 
 
 115 
 
91 
    for(;;){
 116 
    for(;;){
92 
        wdt_reset();
 117 
        wdt_reset();
- 
 
 118 
	cbi(PIND, PD6);
93
119
94 
	if (rbi(PIND, PD7))
 120 
	if (!rbi(PIND, PD7) && !buttontime) {
- 
 
 121
95 
	   cbi(PORTD, PD6);
 122 
	  sbi(PORTD, PD6);
96 
	else
 123 
	  delay_ms(1);
97 
	   sbi(PORTD, PD6);
 124 
	  cbi(PORTD, PD6);
- 
 
 125
- 
 
 126 
	  uint8_t lsb = systime & 0x000000ff;
- 
 
 127
- 
 
 128 
	  e2p_writeByte(address, lsb);
- 
 
 129 
	  e2p_flush();
- 
 
 130 
	  uint8_t rdata = e2p_readByte(address);
- 
 
 131
- 
 
 132 
	  uart_puts("Write: ");
- 
 
 133 
	  utoa(lsb, display, 16);
- 
 
 134 
	  uart_puts(display);
- 
 
 135 
	  uart_puts("\r\n");
- 
 
 136 
	  lcd_overprint_right(display, 2, 3, 0);
98
137
- 
 
 138 
	  uart_puts("Read: ");
- 
 
 139 
	  utoa(rdata, display, 16);
- 
 
 140 
	  uart_puts(display);
- 
 
 141 
	  uart_puts("\r\n");
- 
 
 142 
	  lcd_overprint_right(display, 2, 6, 0);
- 
 
 143 
	  buttontime = BUTTON_DELAY;
99 
 
 144 
	}
- 
 
 145
100
146
101 
	if (!sendtime) {
 147 
	if (!sendtime) {
102 
	  ltoa(systime, buffer, 10);
 148 
	  ltoa(systime, display, 10);
103 
	  uart_puts(buffer);
 149 
	  uart_puts(display);
104 
	  uart_puts("\r\n");
 150 
	  uart_puts("\r\n");
- 
 
 151
105 
	  sendtime=1000;
 152 
	  sendtime=UART_SEND_DELAY;
- 
 
 153
- 
 
 154 
 
- 
 
 155 
	}
- 
 
 156
- 
 
 157 
	if (!lcdTimer) {
- 
 
 158 
	  ultoa(systime, display, 10);
- 
 
 159 
	  lcd_overprint_right(display, 10, 6, 1);
- 
 
 160 
 
- 
 
 161 
	  uint8_t but1 = mio_readPin(1);
- 
 
 162 
	  if (but1) {
106 
	  xbi(PORTD, PD6);
 163 
	    cbi(PORTD, PD6);
- 
 
 164 
	    mio_latchPin(0, 0x00);
- 
 
 165 
	  } else {
- 
 
 166 
	    sbi(PORTD, PD6);
- 
 
 167 
	    mio_latchPin(0, 0x01);
- 
 
 168 
	  }
- 
 
 169
- 
 
 170 
	  utoa(but1, display, 16);
- 
 
 171 
	  lcd_overprint_right(display, 2, 0, 0);
- 
 
 172
- 
 
 173 
	  lcdTimer = LCD_SEND_DELAY;
107 
	}
 174 
	}
108 
	_delay_ms(1);
 175 
	_delay_ms(1);
109
176
110 
    }
 177 
    }
111 
 
 178
112 
    return 0;
 179 
    return 0;
113 
}
 180 
}
114 
 
 181 
 
115 
 
 182 
 
116 
ISR(TIMER0_OVF_vect) {
 183 
ISR(TIMER0_OVF_vect) {
Line 125... Line 192...
125 
        if (tmr0_ovf>=64) {
 192 
        if (tmr0_ovf>=64) {
126 
                systime++;
 193 
                systime++;
127 
                tmr0_ovf = 0;
 194 
                tmr0_ovf = 0;
128 
		if (sendtime)
 195 
		if (sendtime)
129 
		  sendtime--;
 196 
		  sendtime--;
- 
 
 197
- 
 
 198 
		if (lcdTimer)
- 
 
 199 
		    lcdTimer--;
- 
 
 200
- 
 
 201 
		if (buttontime)
- 
 
 202 
		    buttontime--;
130 
        }
 203 
        }
131 
}
 204 
}