Subversion Repositories group.electronics

Rev

Rev 109 | Go to most recent revision | Details | Compare with Previous | Last modification | View Log | RSS feed

Rev Author Line No. Line
98 pfowler 1 
/*
2 
 * atcpad.c
3 
 *
4 
 * Created: 7/06/2013 10:15:34 PM
5 
 *  Author: pfowler
6 
 */
7 
 
8 
 
33 pfowler 9 
#include <avr/io.h>
10 
#include <avr/pgmspace.h>
11 
#include <avr/interrupt.h>
12 
 
13 
#include <util/delay.h>
14 
#include <avr/wdt.h>
100 pfowler 15 
#include <stdlib.h>
16 
#include <string.h>
17 
 
98 pfowler 18 
#include "usbdrv.h"
19 
#include "atcpad.h"
20 
#include "avrutil.h"
63 pfowler 21 
#include "lcd.h"
40 pfowler 22 
#include "wire.h"
33 pfowler 23 
#include "hiddesc.h"
24 
 
101 pfowler 25 
#define BUTTONS	 		1
39 pfowler 26 
 
101 pfowler 27 
#define LCD_UPDATE		11
100 pfowler 28 
 
108 pfowler 29 
#define ROTARY_ON_TIME		30
30 
#define ROTARY_OFF_TIME		15
31 
 
102 pfowler 32 
void pcInterrupt(uint8_t);
100 pfowler 33 
uint8_t getKey(void);
34 
void updateLcd();
101 pfowler 35 
void checkRotarys();
36 
void checkButtons(void);
100 pfowler 37 
 
101 pfowler 38 
 
105 pfowler 39 
// * = 0x25, #=0x20, 0 = 0x27
40 
// F9 = 0x42, F12 = 0x45, ` = 0x35
41 
uint8_t keyMap[] = { 	0x1E, 0x1F, 0x20,	// 1, 2, 3
42 
						0x21, 0x22, 0x23,	// 4, 5, 6
43 
						0x24, 0x25, 0x26,	// 7, 8, 9
44 
						0x42, 0x35, 0x45 };	// F9, `, F12
100 pfowler 45 
 
98 pfowler 46 
uint8_t lcdRectangle[] = {
47 
	0B00011111,
48 
	0B00010001,
49 
	0B00010001,
50 
	0B00010001,
51 
	0B00010001,
52 
	0B00010001,
53 
	0B00010001,
54 
	0B00011111 };
97 pfowler 55 
 
56 
 
100 pfowler 57 
uint8_t oldpotVal = 0;
58 
uint8_t keySelect = 1;
59 
 
101 pfowler 60 
// Start these of at different times, so they
61 
//  don't kick of it the same loop run
62 
volatile uint8_t lcdTimer = 8;
63 
 
98 pfowler 64 
volatile struct {
102 pfowler 65 
        uint8_t current;
66 
        uint8_t last;
67 
        uint8_t mask;
68 
} pcInt[3];
69 
 
70 
volatile struct {
98 pfowler 71 
	uint8_t detected;
72 
	uint8_t timer;
99 pfowler 73 
	uint8_t waitup;
98 pfowler 74 
} buttons[BUTTONS];
97 pfowler 75 
 
101 pfowler 76 
volatile struct {
105 pfowler 77 
	uint8_t direction;
78 
	uint8_t timer;
110 pfowler 79 
} rotary[2];
101 pfowler 80 
 
104 pfowler 81 
int main(void) {
98 pfowler 82 
 
83 
	setup();
84 
 
85 
    while(1)
86 
    {
100 pfowler 87 
		wdt_reset();
98 pfowler 88 
        loop();
89 
    }
39 pfowler 90 
}
91 
 
98 pfowler 92 
void setup() {
97 pfowler 93 
	/*
94 
		DDR : 1 = Output, 0 = Input
95 
		PORT: 1 = Pullup for Input, otherwise set output
96 
		PIN : Read input pin
97 
	*/
33 pfowler 98 
 
97 pfowler 99 
	/*
100 
		PB0	- Output 		- Keypad 2
101 
		PB1	- Output 		- Keypad 7
102 
		PB2	- Output 		- Keypad 6
103 
		PB3	- Output 		- Keypad 4
104 
		PB4	- Input, Pullup		- Function select
105 
		PB5	- Input, Pullup		- Function select
106 
	*/
101 pfowler 107 
	DDRB	= 0B00001111;
97 pfowler 108 
	PORTB 	= 0B00111111;
110 pfowler 109 
 
110 
	/*
111 
		PB2	- Input, Pullup, PCINT16	- Rotary 2a
112 
		PB3	- Input, Pullup, PCINT16	- Rotary 2b
113 
	*/
114 
	DDRC	= 0B00000000;
115 
	PORTC 	= 0B00000011;
33 pfowler 116 
 
97 pfowler 117 
	/*
118 
		PD0	- Input, Pullup, PCINT16	- Rotary 1a
119 
		PD1	- Input, Pullup, PCINT17	- Rotary 1b
33 pfowler 120 
 
121 
 
97 pfowler 122 
		PD4	- Output		- Keypad select status led
123 
		PD5	- Input, Pullup		- Keypad 3
124 
		PD6	- Input, Pullup		- Keypad 1
125 
		PD7	- Input, Pullup		- Keypad 5
126 
	*/
101 pfowler 127 
	DDRD	= 0B00010000;
128 
	PORTD	= 0B11110011;
98 pfowler 129 
 
110 pfowler 130 
	// Pin Change Interrupts
131 
	PCMSK1 |= (( 1 << PCINT10 ) | ( 1 << PCINT11 )); //Rotary Encoder 2
132 
	PCMSK2 |= (( 1 << PCINT16 ) | ( 1 << PCINT17 )); //Rotary Encoder 1
133 
	PCICR |= ((1 << PCIE1 ) | (1 << PCIE2));
134 
 
98 pfowler 135 
	analogInit();
136 
	sysclockInit();
137 
 
138 
	reportKeyboard.report_id = 1;
139 
	reportJoystick.report_id = 2;
140 
 
97 pfowler 141 
	usbDeviceDisconnect();  /* enforce re-enumeration, do this while interrupts are disabled! */
142 
	_delay_ms(500);
143 
	usbDeviceConnect();
33 pfowler 144 
 
99 pfowler 145 
	sei();
97 pfowler 146 
	wdt_enable(WDTO_1S);
147 
	usbInit();
63 pfowler 148 
 
40 pfowler 149 
	i2c_master();
63 pfowler 150 
	lcd_init();
98 pfowler 151 
	lcd_createChar(0x00, lcdRectangle);
40 pfowler 152 
 
63 pfowler 153 
	char strTime[] = {'T', 'i', 'm', 'e', ':', 0x00};
97 pfowler 154 
	lcd_setCursor(0, 1);
98 pfowler 155 
	lcd_print(strTime);
99 pfowler 156 
 
157 
	buttons[0].detected = 0;
158 
	buttons[0].timer = 0;
159 
	buttons[0].waitup = 0;
160 
 
161 
	cbi(PORTD, 4);
98 pfowler 162 
 
163 
}
33 pfowler 164 
 
98 pfowler 165 
void loop() {
99 pfowler 166 
 
100 pfowler 167 
   	usbPoll();
168 
 
101 pfowler 169 
	if (lcdTimer==0) {
100 pfowler 170 
		updateLcd();
101 pfowler 171 
		lcdTimer = LCD_UPDATE;
100 pfowler 172 
	}
101 pfowler 173 
 
103 pfowler 174 
	reportJoystick.data1[0] = (-128 + analogRead(0));
175 
	reportJoystick.data1[1] = (-128 + analogRead(1));
176 
	reportJoystick.data2 = 0x0000;		// Clear all the buttons
177 
 
178 
	reportKeyboard.modifier = 0x00;
179 
	reportKeyboard.keycode = 0x00;
101 pfowler 180 
 
181 
 
103 pfowler 182 
	checkButtons();
183 
	checkRotarys();
102 pfowler 184 
 
100 pfowler 185 
 
98 pfowler 186 
	if(usbInterruptIsReady()){
187 
	    usbSendHidReport((uchar*)&reportKeyboard, sizeof(reportKeyboard));
188 
	    usbSendHidReport((uchar*)&reportJoystick, sizeof(reportJoystick));
100 pfowler 189 
    }
33 pfowler 190 
}
191 
 
192 
uint8_t getKey() {
193 
	uint8_t col, row = 0;
194 
	uint8_t key = 0;
195 
	uint8_t n = 1;
196 
 
197 
	for (row=0; row<=3; row++) {
198 
		cbi(PORTB, row);
199 
		_delay_us(10);				// Wait for the port to change
200 
 
201 
		for (col=5; col<=7; col++) {
202 
			if (rbi(PIND, col) == 0)
98 pfowler 203 
			key = n;
33 pfowler 204 
			n++;
98 pfowler 205 
		}
33 pfowler 206 
 
207 
		sbi(PORTB, row);
208 
	}
209 
	return key;
210 
}
211 
 
101 pfowler 212 
void checkRotarys() {
110 pfowler 213 
	uint8_t i = 0;
214 
	for (i=0; i<=1; i++) {
215 
		// If our rotary timer has run out, turn direction
216 
		//   off and set the cool down period
217 
		if (rotary[i].direction && rotary[i].timer == 0) {
218 
			rotary[i].direction = 0x00;
219 
			rotary[i].timer = ROTARY_OFF_TIME;
108 pfowler 220 
		}
110 pfowler 221 
 
222 
		// If timer is still going, set the correct button
223 
		//   of the joystick to press
224 
		if (rotary[i].timer != 0) {
225 
			if (rotary[i].direction == 1) {
226 
				switch (i) {
227 
					case 0: reportJoystick.rot1a = 1; break;
228 
					case 1: reportJoystick.rot2a = 1; break;
229 
				}
230 
 
231 
			} else if (rotary[i].direction == 2) {
232 
				switch (i) {
233 
					case 0: reportJoystick.rot1b = 1; break;
234 
					case 1: reportJoystick.rot2b = 1; break;
235 
				}
236 
			}
237 
		}
108 pfowler 238 
	}
101 pfowler 239 
}
240 
 
241 
void checkButtons() {
242 
 
243 
	uint8_t key = getKey();
244 
	if (rbi(keySelect, 0)) {
245 
		// Keypad is joystick
246 
		if (key > 0)
247 
			reportJoystick.data2 |= (1 << (--key));
248 
		} else {
249 
		// Keypad is keyboard
250 
		if (key > 0) {
251 
			//if (key==10 || key==12) // Left shift, for *, #
252 
			//	reportKeyboard.modifier |= (1<<1);
253 
			reportKeyboard.keycode = keyMap[--key];
254 
		}
255 
	}
256 
 
257 
	// Only one button for now
258 
	if (rbi(PINB, 5) == 0 && buttons[0].detected == 0 && buttons[0].timer == 0) {
259 
		buttons[0].detected = 1;
260 
		buttons[0].timer = 5;
102 pfowler 261 
		buttons[0].waitup = 0;
101 pfowler 262 
	}
263 
 
264 
	if (rbi(PINB, 5) == 1 && buttons[0].waitup == 1) {
265 
		buttons[0].detected = 0;
266 
		buttons[0].timer = 0;
267 
		buttons[0].waitup = 0;
268 
	}
269 
 
270 
	if (buttons[0].detected == 1 && buttons[0].timer == 0 && buttons[0].waitup == 0 ) {
271 
 
272 
		xbi(keySelect, 0);
273 
 
274 
		if (keySelect == 0)
275 
			sbi(PORTD, PD4);
276 
		else
277 
			cbi(PORTD, PD4);
278 
 
279 
		buttons[0].waitup = 1;
280 
	}
281 
}
282 
 
100 pfowler 283 
void updateLcd() {
284 
	usbPoll();
285 
 
286 
 
287 
	char syschar[10];
288 
	ultoa(systime, syschar, 10);
289 
	lcd_overprint_right(syschar, 10, 5, 1);
290 
 
291 
	uint8_t potVal = map_8(analogRead(0), 0, 255, 0, 100);
292 
	if (potVal != oldpotVal) {
293 
		lcd_percent_graph(potVal, 0, 0);
294 
		oldpotVal = potVal;
295 
 
296 
		char pot[3];
297 
		utoa(potVal, pot, 10);
298 
		lcd_overprint_right(pot, 3, 11, 0);
299 
 
300 
		// Set percentage
301 
		lcd_setCursor(15, 0);
302 
		lcd_char(0x25);
303 
	}
304 
}
305 
 
97 pfowler 306 
void millis_tick() {
98 pfowler 307 
 
97 pfowler 308 
}
309 
 
102 pfowler 310 
/*
311 
 *
312 
 * Process the Pin Change Interrupt.
313 
 * pcint provides what bank caused the interrupt
314 
 *
315 
 */
316 
void pcInterrupt(uint8_t pcint) {
108 pfowler 317 
 
318 
        switch (pcint) {
102 pfowler 319 
                case 0: pcInt[pcint].current = PINB; break;
109 pfowler 320 
                case 1: pcInt[pcint].current = PINC; break;
321 
                case 2: pcInt[pcint].current = PIND; break;
108 pfowler 322 
        }
323 
 
102 pfowler 324 
        pcInt[pcint].mask = pcInt[pcint].current ^ pcInt[pcint].last;
325 
        pcInt[pcint].last = pcInt[pcint].current;
326 
 
327 
 
109 pfowler 328 
        //  Dont continue if we already have a button press going out
110 pfowler 329 
        //if (rotary.direction != 0 && rotary.timer == 0) {
330 
        //        pcInt[pcint].mask = 0;
331 
        //        return;
332 
        //}
333 
 
334 
		// For Each rotary:
335 
        // 		Check which pin caused the interrupt. If they both
336 
        //  		equal 0, the pin that interrupted is the direction
337 
 
338 
		// Rotary 0
339 
        if (rbi(pcInt[pcint].current, PCINT10) == 0
340 
                && rbi(pcInt[pcint].current, PCINT11) == 0
341 
                && rbi(pcInt[pcint].mask, PCINT10) ) {
342 
 
343 
					if (rotary[0].timer == 0 && rotary[0].direction == 0) {
344 
                        rotary[0].direction = 1;
345 
						rotary[0].timer = ROTARY_ON_TIME;
346 
					}
347 
        } else if (rbi(pcInt[pcint].current, PCINT10) == 0
348 
                && rbi(pcInt[pcint].current, PCINT11) == 0
349 
                && rbi(pcInt[pcint].mask, PCINT11) ) {
350 
 
351 
					if (rotary[0].timer == 0 && rotary[0].direction == 0) {
352 
                        rotary[0].direction = 2;
353 
						rotary[0].timer = ROTARY_ON_TIME;
354 
					}
102 pfowler 355 
        }
110 pfowler 356 
 
357 
		// Rotary 1
106 pfowler 358 
        if (rbi(pcInt[pcint].current, PCINT16) == 0
102 pfowler 359 
                && rbi(pcInt[pcint].current, PCINT17) == 0
360 
                && rbi(pcInt[pcint].mask, PCINT16) ) {
105 pfowler 361 
 
110 pfowler 362 
					if (rotary[0].timer == 0 && rotary[0].direction == 0) {
363 
                        rotary[0].direction = 1;
364 
						rotary[0].timer = ROTARY_ON_TIME;
105 pfowler 365 
					}
102 pfowler 366 
        } else if (rbi(pcInt[pcint].current, PCINT16) == 0
367 
                && rbi(pcInt[pcint].current, PCINT17) == 0
368 
                && rbi(pcInt[pcint].mask, PCINT17) ) {
105 pfowler 369 
 
110 pfowler 370 
					if (rotary[0].timer == 0 && rotary[0].direction == 0) {
371 
                        rotary[0].direction = 2;
372 
						rotary[0].timer = ROTARY_ON_TIME;
105 pfowler 373 
					}
102 pfowler 374 
        }
375 
 
376 
        // Clear the mask so we know we've delth with it
377 
        pcInt[pcint].mask = 0;
378 
}
379 
 
33 pfowler 380 
ISR(TIMER0_OVF_vect) {
63 pfowler 381 
	tmr0_ovf++;
99 pfowler 382 
	if (tmr0_ovf >= sys_ovf_tick) {
63 pfowler 383 
		systime++;
384 
		tmr0_ovf = 0;
99 pfowler 385 
		//millis_tick();	// Not working, taking too long to call?
386 
 
110 pfowler 387 
		// Decrease our various millisecond timers
388 
 
101 pfowler 389 
		if (buttons[0].timer)
99 pfowler 390 
			buttons[0].timer--;
100 pfowler 391 
 
101 pfowler 392 
		if (lcdTimer)
393 
			lcdTimer--;
110 pfowler 394 
 
395 
		uint8_t i = 0;
396 
		for (i=0; i<=1; i++) {
397 
			if (rotary[i].timer)
398 
				rotary[i].timer--;
399 
		}
101 pfowler 400 
 
63 pfowler 401 
	}
33 pfowler 402 
}
102 pfowler 403 
 
404 
ISR(PCINT0_vect) {
405 
        pcInterrupt(0);
406 
}
407 
 
408 
ISR(PCINT1_vect) {
409 
        pcInterrupt(1);
410 
}
411 
 
412 
ISR(PCINT2_vect) {
413 
        pcInterrupt(2);
414 
}
415 
 
416 
 
98 pfowler 417 
void usbSendHidReport(uchar * data, uchar len) {
418 
	while(1)
419 
	{
420 
		usbPoll();
421 
		if (usbInterruptIsReady())
422 
		{
423 
			usbSetInterrupt(data, len);
424 
			break;
425 
		}
426 
	}
33 pfowler 427 
}
428 
 
98 pfowler 429 
usbMsgLen_t usbFunctionSetup(uchar data[8]) {
430 
	usbRequest_t *rq = (void *)data;
33 pfowler 431 
 
98 pfowler 432 
	if((rq->bmRequestType & USBRQ_TYPE_MASK) == USBRQ_TYPE_CLASS) {
433 
		switch (rq->bRequest) {
434 
			case USBRQ_HID_GET_REPORT:
100 pfowler 435 
				if (rq->wValue.bytes[0] == 1)
436 
					return sizeof(reportKeyboard);
437 
				else if (rq->wValue.bytes[0] == 2)
438 
					return sizeof(reportJoystick);
439 
				else
440 
					return 0;
98 pfowler 441 
			case USBRQ_HID_GET_IDLE:
100 pfowler 442 
				usbMsgPtr = &idleRate;
101 pfowler 443 
				return 1;
98 pfowler 444 
 
445 
 
446 
 
447 
			default:
101 pfowler 448 
				return 0;
98 pfowler 449 
		}
450 
	}
451 
	return 0;
62 pfowler 452 
}
453 
 
98 pfowler 454 
void hadUsbReset(void) {
99 pfowler 455 
}